Home/OEM & Private Label Aerosol Manufacturing

OEM & Private Label Aerosol Manufacturing

You bring the market and the brand. We handle the formulation, the filling, the valve, the label and the export documents — your label, your barcode, your price point.

35 reference SKUsMOQ from 1,000 cans5,000 sqm plant · 6 linesExport to 26+ countries~20-day lead time

Send an inquiry →+86 18824500363

What we manufacture under your brand

We are a formulator and filler of aerosol products, not a trading company. Our 35 reference SKUs cover industrial, automotive and home & DIY categories, and every one of them can be filled, packed and shipped under your own brand.

If your target product is not in the reference range, we develop it: colour matching, solids content, drying speed, adhesion, heat resistance, gloss level and cost target.

Industrial (17 SKUs): high-temperature coatings, rust converters, zinc-rich rust preventive, dry-film lubricants, electrical insulating varnish, mould release agents, marking paints, anti-slip coatings
Automotive Care (9 SKUs): wheel paint, underbody coating, engine enamel, bumper and trim paint, chrome effect, clear coat, glow luminescent paint
Home & DIY (9 SKUs): epoxy floor paint, acrylic and primer ranges, chrome effect, glow-in-the-dark, frosted glass, fabric and rubber coatings

What you control in the project

A private label project fails when the buyer can only pick a catalogue item. These are the variables we hand over to you:

Formulation — resin system, pigment, solvent blend, performance class
Can and valve — 400ml standard or custom can size, valve type, actuator, spray pattern
Propellant and pressure — selected for your climate and transport route
Label and can livery — your artwork and barcode, printed or shrink-sleeved
Batch and production coding — lot numbering to your own scheme
Packaging — shrink wrap, cartons, pallets, shelf-ready display units

How an OEM project runs

The sequence below is the same for a 1,000-can trial and for an annual container program. Exact timing is confirmed in writing per project, because sample rounds and artwork revisions are the two items that move the date.

1. Brief — you send the target product, market, quantity and any reference sample or spec sheet
2. Quotation — price per can, MOQ, packing and Incoterm, with the formulation options that change the price
3. Sample — we produce labelled samples of the agreed formulation for your approval
4. Artwork review — label and can print checked against the destination market requirements
5. Approved sample sealed — the approved sample becomes the quality reference for production
6. Production and in-line QC — fill weight, crimp, spray pattern, leak test, batch records
7. Documents and shipment — SDS, TDS, UN1950 dangerous goods paperwork, packing list, loading photos

MOQ, pricing and what changes it

Most private label programs start at 1,000 cans per SKU per colour. Mixed-SKU and container-load orders are quoted individually, so a trial button with a mixed palette is possible.

Four things drive the price per can: the formulation cost (resin and pigment), the can size and valve, the print method used for your label, and the order quantity. We quote them separately so you can see what you are paying for and decide where to trade off.

Standard production lead time is about 20 days from confirmed order and approved sample to goods ready for shipment. Transit time then depends on the destination port and the shipping schedule, and is quoted separately by your forwarder or ours.

MOQ — 1,000 cans per SKU per colour for most products
Lead time — about 20 days from confirmed order and approved sample to shipment-ready goods
Mixed-SKU trials — smaller first shipments quoted individually so you can test several products at once
Price drivers — formulation, can size and valve, label print method, order quantity

Documents you receive

Aerosol is a Class 2.1 dangerous good. Documentation is part of the product, so it is prepared per SKU and per shipment, not at the end when the container is waiting.

SDS (GHS format, in the language your market needs)
TDS with performance data for the approved formulation
Batch certificate of analysis and retention samples
UN1950 dangerous goods declaration and transport documents
Label artwork proof and can livery record
Packing list, commercial invoice and certificate of origin

Frequently asked questions

What is the minimum order for a private label spray paint?

Most projects start at 1,000 cans per SKU per colour. For a first trial we can quote smaller mixed-SKU sets so you can test several products in one shipment before committing to a container program.

Do you supply free samples?

Reference samples are free for qualified trade inquiries. The buyer normally covers courier, or provides their own courier account for larger sample sets. Samples ship with TDS and SDS.

Can you match a product we already buy from another supplier?

Yes. Send a sample of your current product and tell us the performance you rely on. We analyse it, propose a formulation and produce a side-by-side sample so you can compare spray pattern, drying time, gloss and colour before ordering.

Will you sign an NDA and keep our formulation exclusive?

Yes. Non-disclosure agreements are signed before formulation details are shared, and a formulation developed for you is not sold to other buyers under the same specification.

Who designs the label?

You own the artwork. We supply the dieline, dimensions and regulatory wording that must appear, then check your files against them and return a proof before printing.

How long does production take?

About 20 days from confirmed order and approved sample to goods ready for shipment. The clock starts after the sample and artwork are approved, because those two steps are what normally move a delivery date.