Chemically transforms rust into a protective primer coating. This guide covers technical specifications, application methods, and expert tips for Rust Converter (ht-019).
What is Rust Converter?
Rust Converter (ht-019) is a professional-grade aerosol product designed for industrial applications. Advanced rust converter formulation that chemically transforms iron oxide (rust) into a stable, protective black primer layer. Apply directly over rust without sanding to bare metal. The deep-penetrating formula stops rust progression and prepares the surface for topcoating.
Key Features
Direct-to-rust application — no sanding to bare metal
Deep-penetrating formula reaches into rust pits
Fast drying — recoatable in 30 minutes
Wear-resistant protective film
Compatible with most topcoat systems
Common Applications
Automotive underbody and frame rust treatment
Industrial equipment and machinery restoration
Metal fencing, gates and railings
Agricultural equipment and implements
Marine and boat metal component treatment
Technical Specifications
Coverage: Approx. 10–15 sq ft per can | VOC Content: Compliant with EU & US standards | Shelf Life: 36 months (unopened, stored below 50°C) | Container: 450ml / 15.2 fl oz
How to Use Rust Converter
Step 1: Surface Preparation - Clean the surface thoroughly. Remove dirt, grease, and loose material.
Step 2: Application - Shake the can vigorously for 2-3 minutes. Hold 20-30cm from the surface. Apply in thin, even coats.
Step 3: Drying - Allow 15-30 minutes between coats. Full cure in 24 hours.
Expert Tips
Temperature matters: Apply between 10-35°C for optimal results
Multiple thin coats are better than one thick coat
Always use in well-ventilated areas
Why Choose Huotian Rust Converter?
ISO 9001 certified manufacturing
15+ years of aerosol expertise
OEM/ODM customization available
Competitive factory-direct pricing